Questions & Answers for: Jeep Cherokee changed clutch kit car wont

...it goes off very slightly when clutch is engaged it has not got any worse been the same for 3 mths ? Could it just want a new clutch sounds like a thrust bearing a new clutch kit would fix that ...

...clutch. You will need a good set of hand tools, including some swivel sockets and both 1/2" & 3/8" drive ratchets & extensions. You will also need a pilot shaft to properly locate the clutch disc. (I ...

...changed? clutch and brake fluid should be change every couple of years, Since the fluid does attract moisture, and degrade the efficiency of the brake and clutch action. there is a bleeder valve ...

CAR BEHIND CLUTCH PEDAL CAN BE SPOTED SOME BREAKE FLUID FROM CILINDER. IF EVERITHING IS "DRY", YOU HAVE PROBLEM WITH CILINDER ON TRANSMITION. ON SOME MODELS ARE OUTSIDE GEARBOX AND EASY TO CHANGE, BUT

...changed slave cylinder and clutch resevoir is full. my version has external slave may have a bad mastercylinder for slave, also did you bleed system good and no leaks,id say master may be the problem ...

...clutch and pressure plate the thrust bearing changed this will then solve your problem. let me know how you get on or if you need further assistance ok Leaky slave cylinder - Pretty much without a ...

gears, must go back to N, then progress to D. whats going on?? P0740 JEEP - Torque Converter Clutch Circuit Symptoms - Engine Light ON (or Service Engine Soon Warning Light) - Transmission shift shock

...clutch kit and the jeep still wont go into gear why I have replaced the clutch kit and the 1992 jeep sport still wont go into gear. So I tried another clutch kit thinking the first one was bad and it ...

...clutch kit soon and install new slave and clutch kit so any info on what it might be or if it might just be an easy fix, it would be greatly appreciated thank you have a nice day. It sounds as though ...

...wont go into reverse and 5th gear Any codes? which engine, we cant guess them ever here, blind and the trans matches engine, power. so.... is it an auto matic? or stick ax-5?? or NV3550? or the 30RH ...