...is dragging under the car but wen i put the clutch in in put it into gears it goes in but can take foot of clutch n wont rive at all just grinds just want 2 knw if its the gear box or anything ...
allow you to select a gear. A clutch kit will need to be fitted this contains clutch plate, pressure plate, release beaing I hope this dos`nt turn out to be to expensive for you John ( South Wales UK
...clutch kit.can the linkage be adjusted be great if you could help thanks. Yes. You can adjust the clutch rod inside the car at the clutch pedal. loosen the 12mm jam nut and unscrew the rod 2 turns at ...
Question about Hyundai Cars & Trucks
...clutch kit fitted and mechined fly wheel new slave cylender and it is still slipping hyundai excel 1997 just had new clutch kit fitted by qualified mac. mech fly wheel new slave clynder gears not ...
changed the clutch drove good then got stuck in first gear installed new clutch kit drvoe the car thru all 6 gears then got stuck in first gear lol u gotta take it apart and line up the plate again ...
changed the Clutch/pressure plate,release bearing.car clutch got free but sounds again. 2 Missing : i changed Lead wires but not genuine after changing wires i got no issues on missing but later after
Question about 1997 Accent
clutch kit. Test it by engaging 1st gear with the engine off--depress the clutch--start engine ---let out the clutch. If it just makes the noise and smells then it will be a clutch kit job. Sounds and
Question about Motor 1997 Tiburon
clutch it wont go into gear while the car is running and I put my foot on the clutch it moves about 2-3 inches and that's it. its hydolic clutch My friend it is a serious matter either your gear plate
Question about Motor 1997 Tiburon
...But if it slipping, then replace the clutch package. I would replace the master and slave at the same time. Have the oil changed in the transmission and will be good to go for another 100,000+
Question about 2005 Elantra
...slipping,,,or adding lucas oil help stop slippiage ,,,it slips in 3,4 ,5 ggear No it won't. Replace the clutch kit, surface or replace the pressure plate.. I would also replace the master and
Usually answered in minutes!
1,503 Questions
1,180 Questions
1,131 Questions
1,254 Questions
1,082 Questions