...or would it have something to do with the clutch? Brake fluid levels are fine. i had the same problem wit mine tot it was d gearbox but wasnt your gona need a new clutch,prefeably a clutch kit
...if it is hydraulic you may just need a new master or slave hydraulic cyinder and not a whole clutch, not sure on type of clutch since this car is not sold n the USA, and most of us experts are
...the trans and installing a new clutch kit, it will come with the bearings, etc. Be prepared to lose a gear completely and you'll have to skip that gear during your shifting order to get up to
The trnasmission slips in first gear a new clutch kit is needed or clutch oil might work
...most IE low rpms high speeds. Soon it will affect all gears. Sorry the only way to fix it ts to replace it. I think they make a clutch kit for this model Good luck Hope this helps Please leave ...
clutch replcd still wont go in gear 92 acura vigor clutch, mstr and slave cylinders replcd still wont go in gear, manual trans Is all the air bled out of the hydraulics?? I would then suspect a faulty
...car is stuck in gear as a result of clutch master cylynder resevoir being bone dry clutch has been inspected seems to be fine car locked up front tires wont engage any other gear if i put it in ...
changed the clutch kit is this normal please i need help. I think that's normal. Just make sure the clutch is adjusted right. An inch or less free play at the pedal is usually what's called for. There
clutch pedal ands killed the engine. when I strarted the engine and attempted to proceed, I could not engage any gear, only a slight grinding sound with higher pitches as I changed to higher gears. if
...sure there ain't no or very little slack in the clutch cable. It dies because the clutch is still engaged with the flywheel. Car won't move in any gear because the clutch prolly needs to be
Usually answered in minutes!
415 Questions
424 Questions
419 Questions
283 Questions
325 Questions
