...Hi and welcome to FixYa, Initially, if the "tapping sound" was not present before the plugs were changed, then one can suspect that the new plug might be the cause: missing crush washer making the ...
Question about 1986 GL 1200 Aspencade Gold Wing
where is the Fuel Line going from the fuel tank to engine where is the Fuel Line going from the fuel tank to the Engine at to empty fuel tank of old gas hi,on the bottom l/h side behind the l/h side ...
I have a 1986 Aspencade Goldwing GL1200A, The bike got blown over do to strong winds. I can get the engine started but it will shut down a few minutes later or driving it about 2 to 3 block. The fuel ...
Question about 1984 GL 1200 Aspencade Gold Wing
change cooling liquid? I do not know how to let old coolant go out. Where is the valve to let old cooland leak out? If you look on the front of the motor you will see the oil filter cover on the right
Question about 1985 GL 1200 Aspencade Gold Wing
...washer. If you desire change the o-ring on the bolt and the o-ring on the cover. Put the bolt back into the cover and place the spring first over the bolt, then the washer, then the filter , so the ...
my 1986 goldwing aspencade 93000 miles is making noise in overdrive any suggestions please Hi, Anonymous I would love to help you with your engine or chassis noise but I just loaned my brand new pair ...
Question about 1985 GL 1200 Aspencade Gold Wing
i have an oil leak from a drain hole in front of engine.what could be the problem? If the oil plug bolt is leaking you need a new aluminum sealing washer. There are no oil weep holes in the front of ...
need to know how many oil drain plugs on my 1985 honda 1200 aspencade The oil drain plug is number 41 in the parts diagrahm. Be sure to replace the washer, it acts as a seal. ...
trying to remove triples tree clamp removed all fasteners and pried at the joints but the tree wont pull off to get to the upper steering bearings replacement I had the same prob with my 1985 (years ...
fuel mixing with oil whats wronge Fuel flow not shutting off. Fuel leaking through tap, floats in carbs and into cylinders. Fix tap and carbs. Tap will need new diaphragm and o-ring.
Usually answered in minutes!
107 Questions
108 Questions
66 Questions