Questions & Answers for: change radio knobs

...change a clock Phaedrus De Wolf-- To set the clock on the pioneer DEH-P2900MP Detachable face radio/CD/MP3 Player, follow the following steps in order. Press the large round knob and hold for 5+ ...

RADIO OFF 3=PUSH LOWER RIGHT BUTTON "DISP TIME" TO DISPLAY TIME 4=PUSH AND HOLD SAME BUTTON AGAIN TIL TIME BLINKS, THEN RELEASE 5=ROTATE VOLUME KNOB CW OR CCW TO CHANGE HOUR 6=PUSH VOLUME KNOB IN ONCE

...radio to change the radio battery. please help Below the radio is a panel held on by two knobs labelled "driver" and "passenger." Unscrew these knobs to get to the radio battery cover. Remove the ...

...radio. The volume control is a knob (not buttons or slider). It's becoming increasingly erratic; you turn the knob down, and the volume goes up, or sometimes doesn't change at all. I've found that if ...

...volume Bose Radio volume knob not controlling the volume, you have to spin it for awhile and it changes the volume but sometimes in the wrong direction or unresponsive. Tried to wiggle method but ...

c.d player. Its a CY290. How do I fix the volume switch/knob? Take the radio out then take apart radio and clean volume potentiometer with electrical cleaner from radio shack. Or just change out radio

...can not change the radio station 5140019-42 Tuning knob assy is the most common - it can also be the PCB but if the radio works but you can't change the station I would replace the tuning knob ...

...change station. all else works fine. options? tuner knob does not move tuner bar -the thin line that shows you the actual radio station. this happened suddenly. station changing was working ...

...change my radio volume control the knob turns but the volume does not change?? Double check the knob. If it does not match the "post or stem" on the radio itself, the knob does not go down far enough ...

...radio clock to day light saving time, dont know how to changes the numbers, I know to push time and hold it until the clock number start flashing, just don't know how to change the number Clock ...