Questions & Answers for: Honda CRV how to change map light

when an alternator belt is changed, would it be possible to overlook a faulty alternator, even after test driving it? Car konked 2 miles down road. Alternator Belt changed. Shop test drove. I drive ...

a wrench appears and it says -1 It's most likely you maintenance light, telling you its time for a oil change. If you have recently changed your oil then you just forgot to reset the maintenance light

2004 honda crv brake lights don't work My 2004 Honda CRV's rear brake lights are not working. Fuses look fine, bulbs look fine, I replaced the brake light switch on the brake pedal and ...

P0171 2006 Honda cr v Replace o2 sensor, cleaned map, replace air filter. No drivability problems. Added injector cleaner Possible causes are as follows, I suspect you have an intake air/vacuum leak ...

Flashing drive light with check engine light on Sometimes the 2 flashes? Take it to the honda garage. Engine light could be anything. D light flashing is the transmission pressure switch.

...light came on after about 5 minutes and remains lite. No noticeable change in car performance. Same thing occurred about 5 years ago; I don't recall how I solved the problem except used High Octane ...

...change yet, only at 40% right now. Checked the oil and it is fine. Only have my oil changed at Honda dealership. Any idea what could be causing the light to come on? It could be the "oil pressure ...

...change map light in a 2005 honda crv changing map light bulbs in 2005 Honda CR-V Remove the cover and replace the bulb. A much better description can be found in the Chilton manuals. You can get LED ...

2003 Honda CRV. After I changed the ABS sensor, the light still on. Please tell me how can I do it? Thanks. You have to clear the ABS Sensor code with a scan tool. Any garage or Autozone will do for ...