Questions & Answers for: Whirlpool change light

...light will change from green to yellow. This tells you that it is almost time to change the filter. It is recommended that you replace the filter when the status light changes to red OR when water ...

...light, the clock works but nothing else turns on, including the fan, light, microwave. When I changed the light it popped and I smelled a burnt smell. We have replaced the bulb, and also the

...light change switch THE LIGHTS DO NOT WORK Is the power supply cord unplugged? Plug into a grounded 3 prong outlet. TRY THIS Is a light bulb loose in the socket? Turn the refrigerator or freezer ...

...light has nothing to do with the motor brushes its the door switch/s there are two of them try pushing your knee on the door if it starts working again change the switches and the brushes go into the ...

light will change from red to green when the system is reset. 1. Press the eject button to release the filter from the base grille. 2. Pull the filter straight out. 3. Turn the cap counterclockwise to

light will change from "REPLACE" to "GOOD" when the system is reset. Changing the Water Filter 1. Press the eject button to release the filter from the base grille. 2. Pull the filter straight out. 3.

...light indicates you need to change the filter. Find the filter knob. It is usually located at the base of the refrigerator in the kick plate or grill. Turn the knob a quarter turn to the left to ...

light I changed the filter but the message does not change Instructions on how to reset the water filter status light on page 14 of your GZ25FSRXYY User Manual Reset Water Filter Status After changing

changed light bulb and still don't work I changed the light bulb because the light was out , and it still don't work Did you check the fuse ? this may need replacing also

...Light I have a whirlpool refrigerator. The Water Filter Status light was reset to green when I changed the filter a couple of months ago. Now the light is completely out. No color at all. Does ...