Questions & Answers for: Hyundai how to change gearbox

...gearbox would not immediately change into D (drive) and I could not move off. After about 10 seconds it finally engaged into Drive with a bit of a thud. My partner has checked the automatic transaxle ...

Ad

...and 3rd gears, both up and down. I have tried double de-clutching, dropping engine speed between changes, etc. Would Molyslip in gearbox help? Also where is the filler? Sounds like a problem with ...

Ad

Question about 2001 Elantra

1 Answer

change the oil in my hyundai matrix automatic gearbox and how much thank you. if you stay in cold weather, use 5w-30 for engine oil, if warm weather 10w-40 oil THOSE FOR ENGINE.. FOR automatic gearbox

Question about 2001 Elantra

2 Answers

change gearbox NOT at all you leave the engine in the car you use a engine support cradle to hold the engine upright so when you disconnect the engine mounts from underneath the engine stays supported

Car gives a **** at the 2nd/3rd shift. All the dealers wants to look at is replacing the transmission, which was already done. The car is a 2004 hyundai elantra. Someone recently told me it could be ...

Question about 1999 Accent

1 Answer

...running for about five minutes all gears are working normal well it seem that u didnt change the oil and filter of gearbox it self... if u already have done above u have to check gearbox ...

...doesn't appear to be slipping.The gear linkage on top of the gearbox is very soft and can also be changed with 2 fingers. The car is a Hyundai accent 1'3 2003 manual 71000 miles.thanks,Nevwel

...gearbox test drove the car all within 6 hours, is that possible? oh, still got sklitch but was told the sklitch would (might)disappear when car driven over a period of time, also told gear change ...

...a sound like something is touching between engine and gearbox, what could it be Had gearbox out , changed gearbox seal , fitted box and oil leak stopped but this sound is there If everything was ...

Question about 2007 Atos Prime

1 Answer

..., change to 1/2/3 no response at all.The gearbox never been touched only the engine..what the hell is happened it doesn't response. Did you remember to bolt the flywheel to the torque

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 Hyundai Santa Fe
2004 Hyundai Santa Fe

1,503 Questions

2001 Hyundai Elantra
2001 Hyundai Elantra

1,180 Questions

2000 Hyundai Accent
2000 Hyundai Accent

1,131 Questions

2006 Hyundai Sonata
2006 Hyundai Sonata

1,254 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,082 Questions

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...