Questions & Answers for: change clutch cable

Question about 2005 181

2 Answers

...clutch cable on 1.5 dci clio and it is too long it wont change gear smoothly Renault say cable is too long and has to be re routed cable length should be 1490mm but cable I got is 1530mm and Renault ...

Ad

...change gears would it be clutch cable sretched or would it need replaceing i doubt it will be the clutch cable but either the clutch is worn or what is more likely is the clutch cable adjuster, the ...

Ad

...a case for a replacement clutch or the clutch cable? hi First adjust clutch cable, also check the cable how it is fitting is there any loose cable. if not getting change the clutch and pressure

...change gear possible clutch cable or cluth itself, check the clutch cable first to see if its stretched, i didnt check and put a new clutch in ,and wasted £250 , try euro car parts for cheapest ...

...change the clutch cable, can you help? Clutch cables can either be really easy to change, or a pain in the rear. Usually, it's a matter of simply loosening the nuts attaching the cable to both the ...

Question about 2005 FZ6 Fazer

1 Answer

change the clutch cable on 1987 fxlr To change the clutch cable, find the clutch cable adjuster and slide the cover up or down so you can get to the adjuster. Loosen the lock nut and turn the adjuster

...change Put in new clutch plate, slave cylinder, master cylinder, clutch fluid, did all the bleeding, changed gear box oil. Gears still stiff. Hard to get first and reverse gears and stiff for other ...

Question about 2000 Explorer

1 Answer

...clutch has a cable system and not a hydraulic clutch system, the cable is probably adjusted incorrectly. If the system is hydraulic(applies to cable systems also), the steels in the clutch pack are ...

Question about 2000 Explorer

1 Answer

change clutch Clutch slipping badly..no drive before you go ripping the gear box out check out the clutch action as a clutch will slip if the compensation port in the clutch master cylinder is blocked

Question about 2000 Explorer

2 Answers

...change the clutch. to test clutch drive off in 3 gear should drive off with out slipping but engine will work harder. if slips try 2nd gear if moves ok with less slip you nearly at the end off the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...