Questions & Answers for: change battery lantern flashlight

...change the bulb of the 6V Eveready Lantern? If it is the yellow floating lantern you have to remove the black plastic stub on the underside of the reflector using needlenose pliers to wiggle and ...

...change the battery on this hardcase lantern took off the rubber surrounding the lantern face, but nothing else seems to come off without unscrewing, But seems like those sre rivits and not screws ...

battery compartment by unscrewing the knob on top of lantern. The lantern bottom comes off once unscrewed (of course you did this to change batteries). There is a "C" clip on the lantern center shaft;

...change battery in energizer flashlight? I have a big energizer lantern/flashlight that takes a size 6V UB5 battery. Inside the light is says "pull upward for battery replacement." I ...

Change a 220-240v/28w/3500k light bulb The question does not make sense since it doesn't pertain to the 6 volt dc flashlight

...change the bulb of the 6V Eveready Lantern if bulb won't come out change bulb Drop a couple of drops of WD 40 on the bulb retaining ring. Let site overnight and in the morning it will easily ...

How do I get to the bulb? I can't figure out how to get to the bulb to change it Unscrew the head assembly. In the back of the assembly is a small plastic nut. Unscrew this and the bulb should fall ...

change the battery in the hard case how do i change the battery in the energizer hard case lantern Start by unscrewing the lense cap retaining ring. Pinch and remove the clip from the negative (-) ...

change battery. Check the attached links to your manual, "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info.

...change batteries. Possible battery corrosion? Is there a workaround fix? Mix water and baking soda together until baking soda is dissolved. Take a small baking pan or a bowel with a flat bottom and ...