Questions & Answers for: kawasaki chain tension

tension of the chain, tighten the adjuster bolt to 5-6.5 ft.lbs., tighten the locknut, replace the ignition cover and re-connect the battery. There are guides on the side of the timing chain that move

Ad

Question about 1997 VN 800 Vulcan Classic

1 Answer

...engine lower right Kawasaki VN 800 1998 model.Clicking sound at engine lower right. Is it the came chain? the chain or maybe the tensioner from chain. First step is to check the tensioner. Is always ...

Ad

Question about 1996 EN 500 Vulcan Classic

1 Answer

can i adjust cam chain tensioner in kawasaki EN 500 1992, if not is it possible to fit manual cam chain tensioner. no, it is automatic adjustment only, once it has reached it's end, you must replace ...

Question about 1996 EN 500 Vulcan Classic

1 Answer

...chain tension. When checking the tension spin the rear wheel and check that the tension does not go slack or get tighter. If the chain is riding up and down the sprocket teeth then the chain is ...

Question about 1996 EN 500 Vulcan Classic

1 Answer

.... sometimes if the timing chain is too old it make noise due to the tensioner out to the maximum tension and does not apply enough pressure on the chain and therefore noise and slight vibration

Question about 1989 ZXR 400

1 Answer

my cam chain is rattley how do i tighten it ive a 89 zxr 400 There is a cam chain tensioner on the ZXR 400. It sounds like you need a new cam chain.Important Note: The cam cahin tensioner is held on ...

Question about 2003 VN 1500 Vulcan Meanstreak

1 Answer

cam chain tightness? how too adjust? The cam chain tensioner is an automatic device. When the chain wears past a certain point and the tensioner can no longer compensate for the slack, it must be ...

Question about Zx600e1 Ninja Zx6e Motorcycle Cover Sport

1 Answer

...CHAIN NOISE YOU COULD REMOVE THE TENSIONER ANDREPLACE IT AFTER YOU HAVE RELAXED THE TENSION SPRING ,THEN REPLACE IT USING CAUTION AS TO NOT LET TENSIONER SPRING PUSHTHE PLUNGER TOO FAR AGAINST TIMING ...

chain tension KLX 650 easiest and best way to adjust cam chain tension with a manual adjuster. @ Hi, Tony for this scenario you will need your service, parts fiche, and owners manual if you can't find

1990 ZXR750r. Where is the cam chain tensioner located? Hi Chad, I am sorry you can't find the first and best tool you ever bought for your Kawasaki but despair not for a mere $0 you can download ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...