...chain away from rear sprocket teeth enough to expose 1/2 a tooth.worn sprockets will have 'pointy'teeth.if wheel sprocket is worn,don't ignore drive sprocket.use a quality lube designed for exposed ...
Hi. Suzuki rf600r 1993. Cam chain rattle. Does this require new cam chain or can it be adjusted without dismantling. Is tensioner automatic. cheers Tony Fuff. a 93 model is likely to need a chain and ...
what is the right oil for the chain was just wondering what is the best oil for the chain ,i hear wd 40 is not great as it just causes the dirt to stick to chain ,its this true and what do you ...
cam chain tensioner tighten to tighten the cam chain tensior do i tighten the nut in the middle Remove the tank to access the top cover of the engine so the chain is accessible, hold the adjuster bolt
Question about 1995 RF 600 R
chain is sticking to back sprocket and making my bike **** when i accelerate my chain went slack so i tightened it now i have to keep tightening it as the chain just hangs so low but my back wheel can
Question about 1995 RF 600 R
sounds like my chain has gone but how long can this last is it very dangerous can the chain come off at all? the teeth on the sprockets are still very good and sharp but does sound like its slipping s
Question about 1995 RF 600 R
my rf 600r 9596 model cam chain jumping can u tell me why and how i cure this my cam chain jumping why and how do i cure tis cam chain tensioner faulty its below the carbs at the rear of the engine ...
1996 Suzuki RF 900 R fastener torque specs What's the torque lb on the front sprocket, rear sprocket small bolts and big axle nut on a 1996 Suzuki rf900 r? @ Hi, Anonymous for this scenario you will ...
Usually answered in minutes!
21 Questions
20 Questions
16 Questions
11 Questions
7 Questions