...and believe me It clunked real bad when I bought it (7,000 miles), I checked the clutch primary chain, well within tolerance, also Clutch plates too. I know your engine is wet sump and the
ZX6 Noisy Cam Chain Bike is a 1996 ZX6R. Cam chain is very noisy. Removed tensioner and it seems to work fine. I saw manual adjusters on ebay. Is there more adjustment in a manual one? Could I get the
...chain wears the sprocket out, "curving" the teeth so it hooks the chain. You probably have the ticking in lower gears as well, but it only hooks the chain at speed - and in 6th the engine revs are ...
bike has a loud ticking noise, what is it bike has a loud ticking noise when running, replace the chain tensionare.
is front sprocket on zzr 600 a left hand thread? is front sprocket on zzr 600 a left hand thread? It has standard threading. Turn counter clockwise to loosen.
...gear clunks when being put into gear, other gears are fine when rolling have you checked your chain tension because that can cause it to clonk if to slack and also check the condition and play ...
...chain about halfway between the rear sprocket and the front sprocket and move up and down.You should also left the rear wheel off the ground and rotate the chain around both sprockets checking the ...
Question about 1995 ZZR 600
...whine while riding under load what could the cause be? good possibility you need to replace cam chain tensioner. also inspect your chain and sprockets, they might be worn
Thinking about purchasing .Are there any main areas of problems/faults or modifications required on a '55 plate machine?(15k on the clocks) hi, fairly good bike , look out far worn chains, sprkts etc,
Has loud tickin noise from top end,sounds like a timing chain related noise Most motorcycles need to have the valve clearance adjusted every so often. When the tolerance get to loose it will ...
Usually answered in minutes!
35 Questions
26 Questions
23 Questions
21 Questions
22 Questions