Questions & Answers for: kawasaki chain and sprocket Motorcycles

Question about 2000 VN 2000

1 Answer

...sprocket teeth are good indicators of maladjusted chains; inspect the teeth to make sure they are meshing well with the chain. If the sides of the teeth are worn, chance are they haven't been seating ...

Ad

...chain. Wiggle the sprocket, there should be no (or very, very little) free play.Solution: Replace the front sprocket.Note: It could be any or all of these in combination. If you are not completely ...

Ad

Question about 1999 ZZR 600

1 Answer

...chain about halfway between the rear sprocket and the front sprocket and move up and down.You should also left the rear wheel off the ground and rotate the chain around both sprockets checking the ...

chain with a 15 tooth front sprocket and 40 tooth rear. It is best to change sprockets and chain together. A stretched/worn chain will damage the sprockets which in turn will lead to premature wear on

Question about 1996 ZX-6R Ninja

1 Answer

...chain sprocket . I think the chain needs adjusted on my 1995 kawaski zx1100. Get the rear wheel off the ground and adjust the chain tension. When checking the tension spin the rear wheel and check ...

Question about 1999 ZRX 1100

1 Answer

chain is definitely ready to be replaced. Rapid stretching is not a good sign. It is good that you are concerned about the condition of the sprockets. Most guys don't even think a sprocket wearing

My kawasai zr 7, 2001 revs too high in top gear, chain sprockets are, 16, 39 is this standard? My Kawasaki zr7, 2001 has new chain and sprockets, seems to rev too high in top gear, can go into top at ...

...chain or rear sprocket? It is probably both chain and sprockets.  Try rolling the bike backwords, if it is making a clicking sound that does not sound normal, it is time for a new chain and ...

...sure the key is in place, replace cover and adjust chain. It is usual to change the rear sprocket and chain at the same time, they all wear together, if you just change one, it will wear

...sprocket but chain is tight If the chain is stretched, it'll skip, and wear down the teeth on the sprocket. It's best that you get a new chain before you have to replace both sprockets too. This may ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...