Questions & Answers for: Yamaha chain and sprocket

...chain on bike go to the middle of chain pull chain together once pulled kkeep held tight and try and pull chain at the rear sprocket if you can pull chain outwards then your chain needs replacing

Ad

Question about 2008 Gladiator

1 Answer

...chain sprocket is damaged.bike is within warrenty it is repairable or i have to replace it >what it costs. I hate to give you the bad news but it is not likely the damaged sprocket is under warranty. ...

Ad

Question about 2001 YZF-R6

1 Answer

yamaha r6 chain link and size? 1999 / 2003: chain 532 .... sprockets 16front 48rear ,.... 116 links good practice to change sprockets with new chain...(dont forget to lubricate chain)

...you can lift it away from the sprocket about 1/2 a sprocket tooth,both chain and sprockets need replacing.Just keep this in mind because a broken chain on 450's can do a lot of damage.Hope this ...

Question about 2008 YZF-R125

1 Answer

...chain and sprocket on yamaha r125 Just remove the chain cover then bend the tab on the lockwasher away from the nut so you can then remove the nut. Install the new sprocket and put the assembly back ...

Question about 2008 YZF-R125

1 Answer

...you just change the chain, the new one will have seriously shortened life as it wants to wear out to the level of the old sprockets. This is not a do it yourself job, specifically the front

Question about 2004 YZ 450 F

1 Answer

...chain in the middle (halfway from sprocket to sprocket) and moving it up and down. After adjusting , you should raise the rear wheel off the ground and spin the back wheel checking every 6 inches or ...

Question about 2009 yBR125

1 Answer

...sprocket and use the proper size chain to match. They sell them in sets. It's quite possible only your chain may need to be changed . Inspect the sprockets!  If you haven't done so, ...

...sprocket and chain what size is the socket for the front sprocket for my 1987 FZR 1000 Hi, Steve for more information about your question and valuable "FREE" downloads that you will need please visit ...

sprocket. A worn chain and chain tensioner could have damaged the sprocket, maybe worn or broken the teeth or maybe the chain is not on the sprocket... To be certain what is happening or not happening

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...