Questions & Answers for: chain adjustment

...chain adjustment I have an older toro riding mower. The chain has streched. Is there a chain adjustment or do I have to take off the chain and take out a link.. I noticed on the rear axle there is ...

...adjusted, roll the wheel a couple of turns and check the adjustment of the chain again. Once finished, tighten adjuster lock nuts and retorque the axle nut to 50 foot pounds of torque. Good Luck, ...

how to adjust primary chain and clutch on 04 1200c thanks First, let's adjust the primary chain first. Remove the upper inspection hole cover. Stick your finger in the hole, find the chain, and raise ...

chain dowsn't stay tight Between the chain bar and the body there is an adjusting screw, if the adjusting screw is  stripped it will not pull on the chain bar to tighten the ...

...chain's tension. Turn the adjustment bolts clockwise to loosen the chain, or counterclockwise to tighten the chain. Check that the edge of both chain adjuster blocks are evenly aligned with the ...

...adjusted and properly tightened, your chain should be checked weekly until you see no difference in the 3/4 inch. After that you should check the adjustment monthly throughout the life of the

chain keeps poppin off do not know how to tighten and keep chain on These are the instructions for adjusting the chain. They are taken directly from the manual available at ...

...chain the adjustment of the timing chain is hydraulic and self adjust to maintain correct chain tension. IF the mileage indicates that the chain may need replacing then these adjusters have to be ...

...the timing chain is adjusted by an oil pump chain tensioner and is to be renewed at each chain replacement. from this it is hydraulic adjustment and is automatic and does not require manual ...

Have a Poulan Pro 46cc chain saw, the chain keeps jumping off the track, I noticed today while the chain is running the chain adjuster is spinning & spinning loosening the chain, need a new adjuster? ...