Questions & Answers for: Uniden ch 26

...given was useful to you - Good Luck! Informatica Very Very simple. Turn it on and hit Manu then ch 1, or 2 or 3 etc to 10. Example: Hit Manu then ch 1. you can enter something like 145.350 but

...ch's. Makes no difference they all operate on the same frequencies. Any of them will work providing you pay close attention to the operating miles. some are 3 some are 26. but that is only Line of ...

I have only 26 names stored in the handseet and it I have only 26 names stored in the handset and it says memory full....it is supposed to hold 100 numbers.can someone please help......Vicki It uses a

...the standby mode, press menu/mute. 2) Press - to move the pointer to ?Dial Mode?. 3) Press select/ch and the display will show the current setting. (The initial setting is Tone.) 4) Press + or - to ...

3 seconds to initialize and CLEAr appears. To take out individual Freq. Manually tune to that freq. Ch/Bank on the scanner. Enter 0.00 like a new freq for that ch. and it will be gone

cb trnsmits both ch 19 and 39 same time got a cb radio it transmits on ch 19 and ch 39 at the same time.what can be wrong with it needs to be realigned. at a shop with a spectrum analyzer.

...and when i push the mic the red antenna light came on so i grounded the radio better still did it changed the braket for the antenna still same thing changed antenna still samr thing running out of ...

sorry disregaurd the wire colors.. on last post 1. Ground Shield 2. Audio 3. Transmit 4. Receive 5. CH. Up 6. CH. Down wires can be any color. just matters what pin and pole of the switch they are one

Adjusted mag mount antenna w/a swr meter. When checked it w/the meter on the '06 uniden pc78 elite, ch 40 was a lot higher. Which is correct ? I set the adjustment on the cb with a workman swr meter. ...

...of the user manual ( detc 6) problem --no handsets can make or receive calls ===possible solutions check telephone cord connected at wall socket disconnect the base ac adaptor for a few minutes , ...