Questions & Answers for: causes hole top microwave

...hole in metal plate inside microwave oven A burning smell and sparks occurred in my Whirlpool MT1100SHQ-1 microwave oven yesterday, and I now have a rather large (quarter-sized) burnt area in the ...

Ad

Question about DMW1153 Microwave Oven

2 Answers

...top modle this is no problum, unplug it!!! open door look for the light hole vents, ( that is where the bulb is ) you will need to unscrew the outer casing. noproblum there is nothing but reguler ...

Ad

Question about GLMV169D Microwave Oven

2 Answers

...hole and squeeze the tool till it pops off.  I put one 3mm rivet on the top hinge and one on the bottom. No drilling needed on my Fridgidaire PLMV169DCd microwave.  I guess u could ...

...hole on the top metal wall of the microwave can this be repaired and is it dangerous. First of all, is the hole a factory one that you never noticed before? If so, leave it alone. I know that ...

Question about R-820B Convection/Microwave Oven

1 Answer

...top and bottom of micro wave oven 2-What is the reason of magnetron antenna metal cap damaged hole in metal cap Please give us better solution Thanks Abid Hussain 1) How is the cavity damaged? Is it ...

...top hinge hole I pulled forward with my fingers and tightened the screw into it without any back since it was unreachable. I reattached the three screws to hold up the bottom cover. And then got ...

Question about PLMV169DC Microwave Oven

1 Answer

...top. 2. Do not know what size it is. 3. Cannot find any info on the product. I wish I had good news for you, but I do not. The hole that you mention is a serious matter. The hole means that your ...

Question about PLMV169DC Microwave Oven

1 Answer

...causes metal fatigue. The part that has to be replaced to fix this is the chasses itself. I have found a way to rig it up and work for a while. I don't know how long it will last, but it is working ...

Question about PLMV169DC Microwave Oven

1 Answer

...hole at the top, near the front, about one inch toward the center of the microwave. 5. I threaded the 2nd plastic cable tie thru a hole in the bottom, near the front, about 2" towards the center from ...

...top, left and right? I loosen the panel near the control switches, and I can see through them to inside the microwave, while it is on. Concern? the holes are to allow condensation and heat to escape ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Microwave Ovens Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...