Questions & Answers for: Yamaha causes fuel gauge malfunction

fuel gauge is not working right after this you need to check your fuel sending unit. It can be cleaned so post a follow up here for more on that. I have a 2008 Polaris Sportsman 500 ATV.. The gas tank

...gauge in my yamaha fz6 2006 is blinking, the manual says there is a electrical circuit problem. I check all the ligths nad fuses and they seem in order, what else could it be? I believe you count the ...

Fuel gauge not working I have 2003 Yamaha Silverado SE and the fuel gauge no longer works. When I filled up the tank on the last trip I took, the fuel gauge only showed about 1/2 to 3/4 full and it ...

I am getting pre-ingition knock when I throttle fast and front exhaust pipe is turning blue. Also backfires when letting off throttle. Only 8,000 miles Backfiring when slowing down is usually caused ...

fuel gauge. For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day. Ybr fuel gauge issue One

fuel gauge stuck My fuel gauge is stuck on empty. When i turn the key on the needle goes to full, but then returns to empty. The tank is full. Do i have to rip the tank apart to get at the float? ...

fuel gauge "freezed" my fuel gauge does not work and report "reserve" (1 notch) also when I fill my fuel tank. I measured the voltage from the fuel sensor that seems to work, giving a voltage between ...

fuel gauge stuck empty The electronic fuel gage on my 1997 Yamaha vmax 600 xtc is not moving up when fuel is added like it used to CHECK GAUGE FUSES ARE OK AND SPRAY CONTACT CLEANER INTO PLUG FROM ...

FUEL GAUGE WILL NOT WORK Hi, Anonymous you could have a faulty sending unit or gauge, there could be a problem with your wiring. On models with the fuel gauge posing as a left-hand fuel cap the gauge ...

...fuel gauge posing as a left-hand fuel cap the gauge is a press fit do not try to unscrew it, simply ample force lift up in a rocking motion to remove gauge. Disconnect wires to the gauge and with a ...