...I used this machine only 3 - 4 times when my landscaping guy could not do the lawn. Any idea what caused it and how can I fix it, if it is fixable? could have been caused by any number of thing's, ...
...you DO NOT need to remove the rotor pulley or spring to replace the rope. This is the area that causes so many guys a lot of extra trouble 2) locate the string that is left and the hole it is ...
...you DO NOT need to remove the rotor pulley or spring to replace the rope. This is the area that causes so many guys a lot of extra trouble 2) locate the string that is left and the hole it is ...
...you DO NOT need to remove the rotor pulley or spring to replace the rope. This is the area that causes so many guys a lot of extra trouble 2) locate the string that is left and the hole it is ...
Stihl backpack blower starter rope is pulling harder and harder. When it dose pull it starts right up. See if your rope pulley is opening up and allowing rope to double over on itself.When this ...
Question about Featherlite Gas Blower, with Low Emission Engine, 150 M
...you DO NOT need to remove the rotor pulley or spring to replace the rope. This is the area that causes so many guys a lot of extra trouble 2) locate the string that is left and the hole it is ...
Question about Featherlite Gas Blower, with Low Emission Engine, 150 M
...you DO NOT need to remove the rotor pulley or spring to replace the rope. This is the area that causes so many guys a lot of extra trouble 2) locate the string that is left and the hole it is ...
rope will not retract. I am assuming you tried to pull start and the rope is stuck out. Just try pulling the rope while it is out, but stand on the hedge trimmer. Sometimes when this happens to me, I ...
...saw with similar complaints. Ocurred after installing new starter rope. In my case the problem was caused by the rope being too small in diameter causing it to wedge intermittently in the
Question about Chainsaw Rewind Starter Spring 024 026 028 032 034 Br Sr 1118-190-0600
...rope in notch, only go one at a time until the handle is all the way back to housing. It's important not to go too many times with your wrap around because it will cause spring to be too tight ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions