Questions & Answers for: caster wheels Cars & Trucks

...wheels are straight. When you jack the truck up the drivers side wheel stays straight but the other side toes out. When you let it down it goes back to straight The truck goes straight but when you ...

...caster between the driver and passanger side one wheel will be influenced more than the other, which will cause the wheels not to return to the steer ahead position giving you this tight steering ...

what is the front wheel caster spec for a VW Golf 4 Estate 2002 what is the front wheel caster specification for a VW Golf 4 Estate 2002 (1.9 tdi) Hello! Unfortunately caster is not adjustable on this

...and right. Can keep the car going straight but I am not getting that Steady Tracking feel. What should I look at first? Look at your wheel caster: Have your car wheels aligned: Caster/Camber

2007 DODGE RAM 1500 CASTER ON RIGHT SIDE WONT COME INTO SPEC GETTING SOME SHIMMY?? truck has 95,000 miles was last aligned with about 40,000 miles after a tire blowout and a bent rim alignment was ...

...Caster When you turn the steering wheel, the front wheels respond by turning on a pivot attached to the suspension system. Caster is the angle of this steering pivot, measured in degrees, when viewed ...

I need toe-in, caber and caster for a Chrysler Sebring Cab 2004 It's toe-in, caster, & camber--all included in a front wheel alignment at an alignment shop--make sure your struts, link rubbers, ...

...caster and the front wheels will wobble violently when you hit a bump. If you have ever seen a shopping cart that had front wheels that would start wobbling all of a sudden, it's the same thing. The ...

...caster. Civic Toe-In Adjustment Secure steering wheel in straight-ahead position. Measure front wheel toe-in. If adjustment is needed, loosen tie rod lock nuts. Turn both tie rods equally in the same ...

toe adjustment camber caster What is the nominal specs for the Camber, Caster and Toe for a 1991 Buick Park Avenue base model. camber 0 to 1 degree castor 1 to 2 degrees and toe in 1/ to 1/4 inch as ...