...camber or caster adjustment on that model. If the car has been in an accident, chances are something is bent. My experience has been that the shock body and/or the steering knuckle is bent. Parts ...
...camber caster on the rear From the factory,no,however, There is a bolt kit available,in a few different sizes from 1 degree to 3 degrees I believe.This is for camber only,no caster adjustment is ...
camber and which one is caster. To adjust the rear camber on these cars you have to have a camber kit. From the angle I am seeing you don't have a camber kit. Also the only way to adjust caster on the
Question about 1997 Civic
...caster and camber. caster and camber may be adjusted only by using adjustment kit ( gm # 15538596 ) Raise vehicle, and support under lower control arms. remove and discard upper control arm to frame ...
...camber caster What is the nominal specs for the Camber, Caster and Toe for a 1991 Buick Park Avenue base model. camber 0 to 1 degree castor 1 to 2 degrees and toe in 1/ to 1/4 inch as different roads ...
Question about 1991 Park Avenue
...caster but they can correct front camber with camber bolts and it is 50/50 that may help caster . they want 350.00 to do the camber bolt but I'm risking the 50/50 what do I do Camber adjust bolts ...
Question about Camber Caster Front End Wheel Alignment Gauge
tried adjusting the camber caster and toe also think rotors are warped You can continue changing parts at random or take your Chevy to a competent mechanic who can find the real problem and correct it
...caster 0.0 degree tol. 0.75 degree camber -0.8 ± 0.75 degree cross-camber 0.0 degree tol. 0.75 degree (for camber, replace original bolts with camber adjusting bolts) REAR camber -1.2 ± 0.75 degree ...
Caster and camber ajustment Camber and Caster adjustment requires special equipment and shouldn't be attempted at home. Take the car to a service or repair center of your choice.
Question about 1997 Town Car
what are the camber caster and inclination settings for my ford focus st3 2015 model "inclination"? That's a new one for me. Usually it's camber, caster and toe-in.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions