Question about SE-270D Computerized Sewing Machine
...cassette the last time I was working on an embroidery project. A metal arm that operates the threader stuck and a little metal part that actually puts the thread through the needle just fell off. I ...
...stuck down. I just used a small push-pin and popped it up. Error message went away. Hi There must still be a piece of paper in the machine check the fuser section at the rear of the machine maybe be ...
...stuck with labels that have super small print. How do I change the size? I've been changing the size, but it keeps on going back to the small size that I don't want. Please help. Thanks, Katy Press ...
cassette bay with help of any light source and cofirm there is no foreign object stuck inside(pieces of paper-pins etc-after that if the problem exist apply a spray from contact cleanr with it is tube
cassette solenoid is turned ON/OFF even if the panel button is not pressed. (5) Check the rear registration sensor. ✒ If the rear registration sensor is stuck backwards, the Ready LED stays OFF
...cassette & in to the delivery asm. then you have a small pice of paper stuck somewhere in the paper path ( hard to see if this is the prob. ) will need to dismatill the paper pathe asm. hope things ...
Question about SE-270D Computerized Sewing Machine
...When I put the thread cassette in, it got stuck on the little piece that slides up and down. I guess that I will have to take it in to the shop. I feel like this machine was a total waste of
...stuck where one is left to wonder...., one removes jams by open rear door or front and removing toner, or cassette, if it is crumpled in fuser, then it aint easy without pulling it apart, sometimes a ...
...printing, gets stuck, tape separated, new cassette. I had this problem and it turned out to be the scissor cutter was not returning to its normal position.I moved it back and the tape works great
Question about MFC-5890CN All-In-One InkJet Printer
...- nothing is stuck. It will then print one page and paper jam the next one. Check the Green stop inside the paper cassette and clean also the Encoder stripe print one page and paper jam the next ...
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions