Question about PIXMA MP160 All-In-One InkJet Printer
...error means the carriage can not travel all the way from right to left, or there is grease or ink on the clear strip in back of the carriage assembly. You can CAREFULLY clean the strip with a q-tip ...
Question about PIXMA MP160 All-In-One InkJet Printer
...carriage error, make sure there is no paper stopping the carriage from moving right to left, and then clean the encoder strip, behind the carriage, carefully with a damp Q-tip. Usually grease gets on ...
Carriage error E42 22 = Scanner error hi, CANON PIXMA MP160 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these
...error 5100, consult owners manual' I dont have the manual. 5100 says the carriage is not free to move all the way left and right, or there is ink or grease on the encoder strip, the plastic strip ...
Question about PIXMA MP160 All-In-One InkJet Printer
I keep getting error 5100 when I attempt to print..I have unplugged,checked cartridges, reset,still get error message Error 5100 is "carriage jam" error. Open the cover and check the carriage road.
...error e2 and e16 pls solve it.tq Carriage unit (main unit) Timing **** strip film Logic board ***'y Carriage motor (main unit)& Internal temperature rise error [5400] - Logic board ***'y ...
Question about PIXMA MP160 All-In-One InkJet Printer
...carriage error". That means that the carriage that carries the ink cartridges is not able to slide smoothly. Open the printer and using a flashlight, look closely for any debris, no matter how small, ...
...Carriage error steps from canon website 1. Allow print head to cool down 2. Disconnect and reconnect the USB cable to ensure a secure connection 3. Press ON/OFF switch to reset the multifunction ...
...error rise when carriage unit (the part that function as cartridge housing) does not move properly. Here are some possibilities of the problem: Carriage unit is faulty so that it cannot 'read' film ...
...error is a carriage problem. The carriage is moving back and forth. Could the old color cartridge be giving me the E22 error? Any other thoughts? It could be, if it leaked over the contacts, or dried ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions