Questions & Answers for: Chevrolet carrera 4 key fob

...KEY" is displayed on the screen. 4. Press the Reset button until "REMOTE KEY LEARNING ACTIVE" is displayed on the screen. 5. Press and hold the LOCK and UNLOCK buttons on the fob to be programmed, a ...

key fob remote start issues I have a 2005 Malibu with a factory car starter. I have two key fobs. One has never worked and the other works when it feels like it. It will always unlock/lock the door or

key fob on a 1996 chevy tahoe You will need a jumper wire to jump pins 4 and pin 8 on the ALDL under the dash. Then hold both the lock and unlock buttons together on the key fob until the locks cycle,

...key fob for my 2005 Chevy How do I activate a brand new key fob for my 2005 Chevy Equinox? Need to go to the dealer for a new FOB to be activated. You can only reactivate original Key FOBS that have ...

...4 at this time you will turn the key off for FIVE mins. and turn back on. repeat step 1-4 TWO more times, after this time you can turn the key off once again and your done the next time you cycle the ...

...key fob 2011 chevy malibu Unfortunately a 2011 Chevy Malibu key fob need professional programming. It requires special equipment to communicate with the car. The good news is I have some money saving ...

...key in ignition 4. Do not turn on the ignition yet. 5. Hold down on the unlock button on the door panel. Do not let up. 6. Turn the key to ON, OFF, ON, OFF (while still holding the unlock button on ...

...4 pings? Is there another way to get the locking unit to lock and unlock? Possible causes you could be not right lock or unlock procedure is you door closed? Must also program 2 remotes back to back ...

...key fob programming mode. Release the unlock switch on the door. They will lock and then unlock to enter the program mode for the key fob. Press the lock and unlock buttons on the key fob ...

...Key Learning Active". Step 4: Simultaneously press and hold the Lock and Unlock buttons for 15 seconds. A chime will sound indicating the remote has been successfully programmed. Step 5: Program ...