Questions & Answers for: carpet mode

...carpet mode it is very hard to push and the belt overheats to the point of smoking. I took off the beater brush and it rotates freely when you hold the plastic end pieces. When it is off I can't find ...

...carpet mode into the bare floor mode, it shifts back into the carpet mode when you try to use it on a bare floor. The vacuum will not stay in the bare floor mode. It sounds like there is something ...

...The heritage 2 pulls 5.5 amps or 660 watts in hose mode and 4.5 amps or 540 watts in carpet mode. Volts to Watts The conversion of Volts to Watts is governed by the equation Watts = Amps x ...

carpet mode, not bare floor mode We also smell hot rubber odor when trying use vacuum on carpet. So we immediately turn it off. We checked the belt and it looks find and does not seem to be rubbing or

...mode, when I press the button to change to carpet it turns itself back to floor mode Switches itself from carpet mode to floor mode constantly make it impossible for it to turn back into flor ...

...carpet mode", I can hear and feel tons of suction being pulled through the wand, even though the wand is properly stowed as the handle for "carpet mode". And when this happens, the beater bar and ...

...You have to continually hold the trigger to release the cleaning solution. If you don't hold the trigger closed then you are running the vacuum in carpet drying mode.

...carpet mode. If you have done this and your cleaner is still operating on hose mode we recommend taking the unit in to a Hoover authorized service center for inspection. Follow the link to locate the ...

mode yet works fine with attachments. What could the problem be and where? The hose is clear. Is there a manual for this machine? There is an adjustment for carpet and for hard surfaces. Have switched

...mode on. It moves easily on carpet with the selector on the base set to hardwood floors (in self propelled mode). What happened? The self propelled mode seems to work well on hard floors and with the ...