carbon brush for the motor. I replaced the control board (again, third one, ugh) and the machine ran only 4 loads. I pulled the brushes and one is completely worn down. I called everyone I could think
...belt is fine. cheers if its a top loader check for timer/timer module fault.front loader check carbon brushes in ...
when it comes to the spin cycle it just sits there... nothing...please help... You will have to get carbon brushes very cheap on line and easy to fix
carbon brush for the motor. I replaced the control board (again, third one, ugh) and the machine ran only 4 loads. I pulled the brushes and one is completely worn down. I called everyone I could think
my washer's spin cycle is not working? Have you checked the carbon brushes, take out and check, they also stick so if there is life left in them push them in and out a few times to see if they are ...
Question about GLTF2940ES Front Load Washer
...and will not do the final spin cycle, Model #GLTF2940ES3, Frigidaire Gallery Front Load. It be the carbon brushes are worn down on the motor, when it goes into the final
how do I replace the carbon brushes? The washer will not go into the final spin cycle.. Per previous issue the issue is the carbon brushes on the motor are worn down.. How do I replace the carbon ...
Question about GLTF2940ES Front Load Washer
front loading washing machine won't work on high speed spin. what's wrong Carbon brushes on motor probably worn. Replace the brushes.
won't do final spin need new carbon brushes in motor the main motor also empty the pump maybe blocked stop it from spinning as water can not get away fast enuff
...brush should be at least half an inch long or replace. Fit new genuine carbon brushes, and follow instructions on packaging. Push the leads back on to the carbon terminals. tighten up motor, and make ...
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
650 Questions
256 Questions