...petol up to the motor.Thanks Pam if it is the efi model yes the pump is in the tamk, if it is a carburetted version the pump is on the engine. I have experienced this problem. When the motor is ...
pipes aroung the carb. or intake manifold If their is check for coolant leaking into the carb. or intake. Dont want to worry you but have you checked the engine coolant level ---it could be that water
...pipes, etc. There is a device in the throttle body called an Idle Stabilisation Valve - they get gummed up, especially on such an old car, and with NZ's low-petroleum fuel - lots of additives in NZ ...
...CARB WITH ALL THE VACUUM PIPES MIX UP.I WOULD LIKE TO KNOW WERE TO PUT THE PIPES .I GOT MYSELF AN EXPENSIVE HAYNES MANEUL AND IT DONT SHOW ANYTHING.NOT EVEN THE GEARBOX. Ther should be a chart under ...
Question about 1997 Corolla
...carb has been stripped and rebuilt,new plugs fitted, You have a fuel leak, its as simple as that you are going to have to trace it to its source. As it's only after starting it is likely to ...
...for purchase. If you should find a source for these, PLEASE let me know! The female threads on the carb inlet, glass fuel filter inlet and outlet, and the fuel pump inlet and outlet are 1/8-28 BSPT.
...split in vacuum pipe or one has come off. Check all vac pipes, spray around vac pipes with the carb cleaner with the engine running, see if engine speed changes, if it does you have a vac
toyota 2E vacuum hose diagram I disassemble my top engine together with the intake pipe and carb and now I assemble it again but I forget the proper connection of all vacuum hose, any body can help me
Question about 1990 Corolla
...the pipes then spray some carb cleaner in the carb and hold the rpm at about 2500 or try revving it up to 4500 gradually and choke it on top of the carb with your cause it might be dirt stuck in ...
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions
