Questions & Answers for: Beta carb leaking gas oil

Question about 2005 Alp 200

1 Answer

...in the dark...... jetting too rich(pilot jets)?, choke sticking?, air screws out of adjustment? carbs out of balance? time warp messing with your

Ad

Question about 2008 RR 125 Motard

1 Answer

...gas. New spark plugs won't hurt but you may not notice any difference. What would be better: An all-out attack on the carbs, including disassembly, soaking in carb dip, re-build kits and a good ...

Ad

Question about 2008 RR 125 Motard

1 Answer

...carb cleaning, valve adjustment (ugh...shims), air/fuel/oil filters. No change. At more than 5% throttle, there's no miss, and it pulls very strong. At full throttle, I don't have the guts to see the ...

Question about 2005 RR 450

1 Answer

carb rebuild kits for it - may as well since you'll have to disassemble the carbs to clean the gum and varnish out, which is really the best thing for it at this point. I wouldn't try to run it again

Question about 2008 RR 450

1 Answer

...carb cleaning? Or could it just be part of the personality of the bike? I also noticed that it only smokes out of the left exhaust pipe for those that remember the other 'smells of gas' thread. need ...

Question about 2008 RR 525

1 Answer

oil waste Im running out of of oil approximatelly at the rate of one quart every 500 miles or so (actually a little less that that). Now while this isnt so serious.... Im just thinking of using some ...

Question about 2006 Alp 125

1 Answer

water in gearbox and oil in water water in gearbox and black oil in water new mechanicle seal fitted starts ok but now the clutch wont realese from the engine when the bike is running it is a beta125 ...

well it takes a min to start and i get going and it cutsbin and out if i give it gas when was the last time you cleaned the carb etc ? clean it !

Question about 2006 Rev50

1 Answer

...2004 yamaha banshee, when i was coming to a stop, went down to first and it cut off. i cleaned my carbs, checked my spark plugs, and they were fine, went to go crank it and it wouldnt crank up at ...

Question about 2006 Rev50

0 Answer

gas tank" find a couple forums to view the different options available. 2. Remove your air cleaner and clean and re-oil per Mfg. specifications. 3. Remove the carburetor, disassemble and decontaminate

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Beta Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66850 Answers

Are you a Beta Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...