Question about 2012 Sportsman Big Boss 6x6 800
...carb off i noticed a chunk of the piston was broken, so i took the head off and got a new piston and new rings, now i put it all back together and i have fuel and i have spark, but it wont start, i ...
Question about 2004 Blaster Base
gas 32 to 1 syn 2cycl oil cleaned the carb rebuild kit 230 jet needle is on the 3RD spot i tried to move it down one spot it does the same thing i checked the reeds no cracks its stock air and exhaust
Question about 2009 Big Bear 400 IRS 5-Speed 4X4
...gas line from where it enters the carb and pull the hose out to the side where it can gravity drain into a clean container. Then, leave the cap off of the tank for a few hours to evacuate the ...
...Carb is clean, seal to motor is tight, fuel/air screw doesn't change anything, new plug, new gas, new oil and filter, sprayed starting fluid to check for air leaks. Fuel supply problem somewhere. How ...
...carb cleaner the cylinder housing out cleaned the crank case put a new plug in new oil new gas an it just will not start I don't get it What's your year, make, model and engine? - And one question - ...
Question about 2005 TRX 400EX
...gas in the crank case/ oil resorvor if it is carbed your inlet needles are leaking by Float metering needle is sticking causing it to overflow back into the block has dirt causing a needle to stay ...
Question about 2005 TRX 400EX
...carb floats sticking and leaking back into cylinder can cause hard starting and can clean oil off bearings causing damage https://www.polarisatvforums.com/threads/gas-in-oil.10700/ Yes, a stuck ...
Usually answered in minutes!
2,486 Questions
168 Questions
72 Questions
99 Questions
61 Questions