Questions & Answers for: car turn compression

Question about 1989 Dakota 2WD

1 Answer

...and turn over to re-build compression........also if you jumped your timing chain, the valves would be open when they should be closed causing no compression, I would need more info on what its ...

Ad

Question about 1991 LeBaron

1 Answer

...on my 1991 Lebaron. Do the caliper pistons need to be turned as they're compressed like on some cars or can i just compress them without turning them? The only time you need to turn and compress

Ad

...to start the engine. Does your car lost its compression? Is the car has blue smoke on exhaust muffler ? Do you need top up oil regularly? All these things show your car has problem with

2005 ford focus zx4 ac compresser making noise when ac is turned on when ac is turned on ac compresser starts making loud nosie when compresser clutch engages. Noise stops when ac is turned off. I was

...compression. The car also has a noticeably rough idle. At times, if you don't have the vent running, the idle drops at stop lights and stop signs. Also, when it's cold outside, the ...

Question about 2010 Fusion 2.5

1 Answer

no engine compreesion compression have a compression test done to confirm your suspicions. If the compression is low on some but better on others it may be valves . If the compression doesn't alter ...

Question about 1991 Camry

1 Answer

battery fuse i changed the battery and the 80 amp fuse. it turns over now but wont start Hi Megane, when you said it turns over is the turning braking compression, rotates fast like having no ...

Question about 1999 DeVille

2 Answers

...turn making the car go. A compression leak is when this compressed fuel/air mixture is escaping from the combustion chamber.. This can happen 3 ways. 1. Bad piston rings, 2. Blown head gasket or ...

...Turn ignition so that engine turns over (engine might start) turn off ignition and check reading on compression tester. Now see if reading is within manufacturers specs. Do this for each

...compression to drive the piston and turn the crankcase. Most small engines require at least 90 pounds per square inch (PSI) of compression when hot, and 100 PSI when cold. How to Check Small Engine ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...