Question about 2000 Sebring
seat back and cushion. And Just a fair warning here - you WILL spill fluid inside your car. If you manage not to, I want to know how. I cover everything with garbage bags because there have been a few
...Remove the alternator drive belt. Remove the adjusting T-bolt, pivot bolt, and mounting bolt, be careful not to loose the spacer. Remove the alternator. To install: Attach the alternator to the ...
...Remove the alternator drive belt. Remove the adjusting T-bolt, pivot bolt, and mounting bolt, be careful not to loose the spacer. Remove the alternator. To install: Attach the alternator to the ...
...bracket. Install the retaining screws that secure the quarter trim to the quarter panel in bolster area. Install the second rear seat belt anchor (if equipped), and the first rear seat belt anchor. ...
a belt keeps slipping off and the power steering no longer works. Check to see that no bolts or mounting brackets are loose causing the power steering pump to be out of alignment with the rest of the ...
...Module" and its located right on the left side of the dash as you sit in the seat. It mounts on the bracket that holds the dash to the left kick panel. Hope this helps and have an awesome day
Question about 2001 Voyager
...seat belt anchor. Remove screws attaching quarter trim to quarter panel from bolster area. Remove screws attaching rear edge of quarter trim to attaching bracket. Disengage hidden clips attaching ...
...seat of all debris and corrosion, then carefully install the new freeze plug using a wood block and mallet. Depending upon the location of the freeze plug, either adjacent components (exhaust pipes, ...
Question about 2007 Sebring
Seat the radiator with the rubber isolators into the mounting holes provided, with a 10 lbs. force. Position air conditioning condenser onto the radiator lower mounts and install upper screws. Tighten
...seat to locate, release and push out the two W-clips that secure the fascia bracket that is snapped onto the bottom of the lamp housing from the body sheet metal. 5. Firmly grasp the exterior of the ...
Usually answered in minutes!
1,229 Questions
1,289 Questions
1,198 Questions
1,079 Questions
1,173 Questions