Questions & Answers for: car radio removal tool

...radio removal procedure I want to remove the radio. I have the pull out tools, but when I try to pull them, the radio won't come out. Do I have to remove the dash trim around it? If so, do they just ...

Ad

...removal procedure. Insert the Radio Removing Tool T87P-19061-A into the face plate holes until the tension of the tool locking into place can be felt. (There are tension clips that this tool pushes ...

Ad

Question about 1993 Grand Marquis

1 Answer

...of radio. Tools are sold in sets as it requires one on both sides of radio. Insert tool about a half inch and the slightly push towards outside of stereo to remove. A little tricky for first ...

...Car Workshop Manual REMOVAL AND INSTALLATION Bulb ?Electric Clock Special Tool(s) Radio Removing Tool T87P-19061-A Removal Disconnect the battery ground cable. Pull out the radio using Radio Removing ...

Question about 1998 Mountaineer

1 Answer

...radio removal tools. they spread 4 spring clips. Remove the radio chassis. Insert Radio Removing Tool into the radio face plate and release the radio retaining clips. Pull outward on Radio Removing ...

...radio removal tool. Left and right on the side of the radio there's 2 holes, insert the tools into the holes and the radio will pull straight out. The tool is available at many stores and online, I ...

...Radio removal tool. It looks like two "U" shaped wires with a small ball on the ends. they will go in the four holes in the corners of the front of the radio. Then you just grab them and the radio ...

...radio in a 94 town car Disconnect the negative battery cable. Pry the trim panel using a trim removal tool. Using a DIN "radio removing tool" push the tool into the faceplate far enough to engage the ...

Question about 2001 Tribute

1 Answer

...radio..how do I get this radio out need the radio removal tool.it is two small handles that you screw into each front side radio.tool act as handles where you can grip to remove the radio from

...Removal Remove the radio chassis. Insert Radio Removing Tool into the radio face plate and release the radio retaining clips. Pull outward on Radio Removing Tool to remove the radio chassis from the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...