Questions & Answers for: AudioBahn car eq

AUDIOBAUN A8002T Car Audio Car not running, everything fine! Car running , amp turns on for approx. 10 second then goes into protection. Even when amp RCA's removed,Speaker wires removed & gain as low

...eq on and off with the power button. Just remember if you wire it up this way, and forget to turn it off when the vehicle is not running, after about 24 hours or so, the battery may be drained ...

toyota camry 1993 model- fujitsu car radio how to take out the car radio from its console? radio brand fujitsu, car model toyota camry ultima 1993 You are going to have to remove the center console, ...

car stereo installatio(aftermarket) i intalled a sony car stereo and when the car is of the stereo is still on. how can i hook it up to when i turn of the car the stereo turns off? If you used a wire ...

...eq and it only has a red batt. wire and a ground wire. NO REMOTE turn off wire! Can i wire thid fused red wire to the head units remote power lead? that unit use just two power wire you have to ...

Adjust Amp How do I adjust my 400 watt amp for better sounding base in my car Run the signal through an equalizer.

need info on wiring for audiobahn aeq6q 5 band equalizer There are 3 terminals one is power and one is ground and one says "sens" what do I hook up the "sens" terminal to is it the remote signal? Yes,

Legacy 2 amp. protect light comes on when i hook up the power . I can have only the power hooked up and the protect light comes on. Check fuses and your ground wire.

...93 and '95 Camry have identical color codes. Likewise, the vehicle harness connectors are the same. Car Radio Constant 12V+ Wire: Blue/Yellow Car Radio Ignition Switched 12V+ Wire: Gray Car Radio ...

when going over a bump car speaker has static when playing a tape not when playing the radio. Check your tape head connectors. Also check your roller mechanism.