Questions & Answers for: capstan motor Audio Players & Recorders

...capstan motor is the problem of your camera...that why c31:30 is appearing..there are 3 possible problem of the capstan motor...1 if the motor running too fast the sensor of the capstan is busted...2 ...

...some request : = capstan belt size : thickness,diameter,width ( millimeter ) = drawing the track of them from motor to the two capstans ever yours Hi What make and model are you repairing? ...

capstan motor of NV-M9000 is not working properly The Capstan motor of NV-MD9000 is not working properly . Some time its goes on play but rewind and forwerd is not working. This is not the capstan ...

...REMOVAL OF THE TAPE BUT WONT EJECT TAPE. Your capstan motor has a problem, could be stucked-up or sensor fails. No capstan pulse detected.You may check capstan supply and drive as well. Good ...

...capstan motor is running I have a Teac A-6300 that won't go fast forward or reverse but the capstan motor is running The Capstan motor is just for the play speed regulation so it has nothing ...

motor pulley OR the capstan motors DC servo control has a shorted transistor in it and that means you need a new motor. I have just obtained some motors for cassette decks that might work in your unit

...and the Capstan Belt can be replaced. Capstan bearings and motor bearings need oil once a year as well. I hope this helped to some extent- I have been working on decks now for better than 40

...capstan motor can also be worn out. These need to be taken apart and examined at to brush life and to see if it has bee overheated. I get a lot of motors that are burned up by customers. It is a $150 ...

...capstan motor in play configuration. If there is power at the motor terminals, the motor itself may have failed. Almost in this group of parts, problems with sear rubber belts, or rings and maybe ...

...capstan motor and video head drum motor to malfunction in my National NV-850? The capstan motor 'twitches' and the video head drum spins very fast. Sometimes the drum doesn't spin at all. motor going ...