Questions & Answers for: JVC capstan motor

...the cover to remove it. Does anyone know of a way to remove it manually? the only way you could remove it manually is by removing the covers and applying power to the capstan motor its alot of

error 06 problem problem 06 error The capstan motor has stopped functioning.Needs to be replaced.

...battery Do you happen to try with another tape? if so, it needs repair, mostlikely the capstan motor need to change and it needs hinger skill to do this, since you have to adjust it after

..... any suggestions? TRi to check the take up wheel and idler gear or capstan motor is engaged with idler gear. jvc model gr-d350u when record anything no volume when play back sound like it is ...

E06 i keep getting E06on my camcorder E06 is a capstan motor problem.The capstan motor needs replacing.

...REMOVAL OF THE TAPE BUT WONT EJECT TAPE. Your capstan motor has a problem, could be stucked-up or sensor fails. No capstan pulse detected.You may check capstan supply and drive as well. Good ...

...section and the capstan/drum motor section. Check if loading is back to parking mode. If not unwind and allow the loading to park and see if the power latches. if so check the loading motor drive

...capstan belt with a different belt, same length but different thickness (only one I could find) and now it plays too fast. Is this a matter of finding the right belt or could there be a problem with ...

...capstan motor pulley instead of the position it should be on. You need a new capstan belt and adjustment in any case. If the Belt is not the problem then the motor might have a shorted control ...

...capstan motor needs to be evaluated as to size and what is available- I have many motors in stock, Shaft size and spinning direction and mounting are the things to be concerned with. Getting a ...