...jacuzzi, there is just light bubbling towards the surface. I have a Sta-Rite Pump model # MPRA6F-148L you need to turn the air on should be some sort of cap or screw in type thing to let the air in ...
Question about - Bathtub - Alcove - Navona - R105917
can you cap off the jets of a whirlpool tub if you no longer use the jets? you can but it's not worth the trouble of doing it! lots of fiberglass and you need to have access to the whole tub on the ...
Question about - Bathtub - Alcove - Navona - R105917
...CAPS THAT I COULD JUST SCREW IN PLACE OF THE JETS AND HAVE A NOIRMAL TUB WITHOUT HOLES. OTHER THAN THE HOLES THE TUB IS OVAL AND SMOOTH ALL AROUND. THANK YOU FOR YOUR HELP. I have worked on jetted ...
...the jets and then cap the pump nipple, where the hose connects. This would likely be easier than trying to locate multiple caps to plug the jet holes in the tub. I hope this helps you. disconnect ...
Question about - Bathtub - Alcove - Navona - R105917
...jacuzzi jets. I real don't use the jacuzzi part that often. Is there a way to cap off the jet holes. rather thatn going through the expensive of fixing. Currently there is not a solution for capping ...
can you cap off an old jetted tub currently there are no solutions out there for plugging off the jets in a whirlpool tub.
Question about - Bathtub - Alcove - Navona - R105917
...jets on my Jacuzzi brand jetted tub, so I can use less water and still have a water level above all the remaining jets? To disconnect one of the jets to get more water flow to the other jets may not ...
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions