Questions & Answers for: HP DesignJet caps

hp designjet 500 ps 24" screen says too much skew need to reload paper which I have done many of times but still no success DOWNLOAD Ensure that when U're loading it the paper ia aligned to the blue ...

getting a system error 1180 on our HP design jet 9000 we are getting a system error 1180. System Error 1180: Capping Motor Error Description: Capping Motor over current is detected. Corrective Action:

...cyan just fine, then it starts printing cyan in lines, and slowly fades out. I tried cleaning caps, cleaning wipers and print head recovery. Only thing that seems to help is waiting a little ...

86-01 Error 86:01 still there. I replaced encoder strip twice, encoder sensor. Carriage PCB and Mech PCB. I'm out of options now. Maybe the scan ax motor, but during scan ax test the motor ...

error 1252 error 1252 power/on and off System Error: System Error 125x: Sub-Tank Supply Error Problem Description: The Sub-Tank Sensor does not switch to less than half even though ink has been ...

paper jam plotter the cartriage head goes to the service station, and stops, showing an error massage. possible paper jam do you ever see either of these codes during the error-86:01 or 42.xx if so ...

error 0b0004 0000000e the fault code refers to the APS failure( air Pressure system) things to check- remove all ink cartridges( one of these may be the fault) check at the back of the plotter at the ...

...there is an air leak into the iss ( ink supply system) or tubes as they are known, the little stem caps are usually where the Iss fails after repeatdly changing heads the stemms can work loose- ...

up is that true or its possible they dried up ?? more likely they have dried if not returned to end caps(with origna l packcging