Questions & Answers for: no cap faucet

faucet.. I am confused as to whether I need two o rings between the cap and nut; a small one that fits up inside the cap and another larger one that fits on the bottom of the cap[next to the nut. Does

...faucet is built. The rubber cap(s) was in pieces when I took the thing apart so I have no idea how they were SUPPOSED to go together with the spring(s) and cannot find any diagrams to address this. ...

...faucet? Remove handle and on top it has a cap that has to be removed to access the ball it will require maybe a strap wrench or chanel locks with something on teeth to keep it from damaging top cap. ...

How to unscrew the cap on a Blanco single faucet with sprayer I took the plastic plug out, but can't unscrew the cap to take it off. Allen key? What size? Thanks. allen key is usually 1/8 inch

...will contain ball assembly. Turn off water to faucet. Unscrew handle via set screw under plastic cap. Unthread cap over ball assembly. Pry out valve seals & springs. Reverse procedure to

...faucet but don't know how to remove the cap. i am not sure which cap you refer to. there is a cap just below the handle. turn off the water supply for safety and remove handle then turn the cap ...

...beneath sink Is there an air gap next to the faucet that is leaking. If so, it is probably clogged. Pull the cap off of it and clean it out. This is what it may look like before you take the cap

How do you take the cap off of a Rohl R3810STN Single handle faucet?? Under the handle is a small cap/cover remove it and the handle set screw in right there.

...all have that arrangement. I have a Grohe Geneva faucet, which is quite similar to the Seabury. The handles have a cap, and the screw that holds the handles on the faucet body is under the

Replace tub faucet Broken handle pry plastic cap, under cap remove Phillips screw,pull handle and replace