...blower motor 2004 GMC Canyon 2.8L 4 cyl w/5speed. the 3 lowest settings on AC/Heater blower motor does not work. It only works on the highest setting. The Canyon has an inherint problem with the Fan ...
Blower motor on a 2004 canyon How do you change the heater blower motor on a 2004 canyon truck and where is it. the heater motor should be located on the passenger side either under the dash by ...
blower motor ok.. will replace connector $50.00 could still be resistor issue??? Replaced connector and everything is perfect. Several canyons have had this same issue . looked through several forums.
no heat. no fan. fuse keeps burning. 2007 canyon I would guess that your blower motor is toast.
My 2005 GMC Canyons blower motor works only when the switch is placed on the highest position. Is it the switch, or the blower motor, or is there something that I am not thinking of? I believe your ...
...canyon Replace the blower motor resister,it is mounted right next to the blower motor,it has a lug with about 7 wires on it.Just unplug it and remove two screws to remove the resister.This controls ...
canyon,s heater motor only works on high, is there a relay switch that has gone bad? the blower motor resistor is bad it is under dash on passenger side There is a blower moter resistor on the back of
canyon and the blower will only work on high.what could this be Sounds like a bad blower resistor. Yes this is the blower resistor. It is located under the glove box in my truck and it will need to be
canyon no voltage at heater resistor heater not working at all no voltage at heater resistor with key on or off The resistor provides the ground circuit for the blower motor. So you would need to have
Canyon 2008 Blower fan only works on 2? Blower fan only works on 2? I had a problem on my 2006 sierra, the fan wouldn't work on 5. gm had a curtisy recall, they had to replace a resistor, at no charge
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions