Questions & Answers for: cant hear fuel pump cycle

...HEAR THE FUEL PUMP KICKING ON THEM CHECK THE FUSE FOR IT, UNDER THE HOOD. HOPE THIS HELPS WITH YOUR DILEMMA. LET ME KNOW. BEST OF LUCK I had this happen to me and I just pumped the gas pedal to the ...

...Now doesn't start but will crank. Where am I going with this? Check fuel pressure to see if fuel pump is working. Can you hear fuel pump cycle when you turn key on? If not fuel pump could be

...cant hear the fulp pump trun on and i dont know if it that When you first turn on the key to "run" you should hear the fuel pump cycle by listening near the fuel cap. (Gas cap) If you don't next you ...

...cant hear it try to listen at the fill cap when someone else turns the key on. if you cant hear it , check the safety shutdown relay under hood, it shuts down fuel pump and ignition did you put any ...

...hear the fuel pump run for three to five seconds. If you cant here it it would further support the burnt up fuel pump. try this,turn your key to the on position,hear the fuel pump hum? will omly hum ...

hear the pump as you cycle it it build pressure and get easy to start. Why does it work at first crank the fuel pump shoot out pressure the then slowly turns(Manufacture design because its in the fuel

...hear you fuel pump running? If not I would suspect either a faulty pump, pump relay, fuse or wiring issue. If you have no fuel pressure that is where I would start. If you end up replacing your pump, ...

...cant get it started have replace battery, fuel pump relay wiring, crank sensor, morcle, new spark plugs Check fuel pump itself to see if you can hear it cycling. If you can move down the line to fuel ...

...cant hear kick on when i cycle the key.i really need help tracking down problem step by step. If you hear the pump kick on when you cycle the key, what makes you think you have a fuel problem? Have ...

hear the fuel pump (humming sound) run for a few seconds and then stop. If no humm, no pump, no fuel. If you hear the fuel pump cycle on/off then turn key OFF and back to ON, wait for pump to cycle to