Questions & Answers for: Dodge Intrepid camshaft sensor

...camshaft sensor on a 3.5 dodge intrepid need help The Camshaft Position Sensor is installed in the Timing Belt Housing Cover above the Left Camshaft Sprocket. Below is a couple of pictures... I hope ...

Ad

Question about 2000 Intrepid

1 Answer

Camshaft Position Sensor I have the following error codes P1684, P0340 & P0700. What do they mean? Can I replace the parts myself? Dodge Intrepid 2000 2.7l DOHC P0340 Camshaft Position Sensor "A" ...

Ad

...sensor. The camshaft position sensor is mounted to the top of the timing case cover. The bottom of the sensor is positioned above the camshaft sprocket. The distance between the bottom of sensor and ...

...light cam shaft sensor position A code the code for camshaft sensor is--p0341 and p0342, po341 is camshaft range or performance problem. p0342 is camshaft curcuit , low input. hope this helps

Question about 2002 Intrepid

1 Answer

Camshaft sensor I recieved a code for the camshaft sensor, and have also been having emissions evap codes. I was driving today and the car started to chug, like the fuel pump was about to go out. Can ...

Question about 2002 Intrepid

1 Answer

...camshaft sensor reference pulses and the number of crankshaft position sensor reference pulses received. If the PCM receives an incorrect number of pulses, Diagnostic Trouble Codes (DTCs) should be ...

...camshaft position sensor may have failed the PCM may have failed there exists an open circuit the crankshaft position sensor may have failed Possible Solutions With a P0340 OBD-II trouble code, ...

...camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM. Don't just replace the CPS (camshaft ...

Question about 2000 Intrepid

1 Answer

...sensor doesn't cost much, I would start with that after checking the Timing. Also, be sure to check the condition of the Connector going to the Crankshaft Position sensor and Camshaft Position

camshaft sensor in a 2000 dodge intrepid 2.7 engine The camshaft position sensor is mounted to the top of the timing case cover. The bottom of the sensor is positioned above the camshaft sprocket. The

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...