Questions & Answers for: camshaft position sensor 1999 chevy

...camshaft position sensor located-99 Chevy Lumina 3.1 Where is the camshaft position sensor located on a 1999 Chevy Lumina 3.1? It's held down by one bolt right above the timing chain cover. It's next ...

...was constanyly running thought maybe it finally went out could possibly be either cam position sensor or the crank position sensor if the fuel pump doesnt read the signal from them it will not ...

...week. My suburban threw a code. After checking it out. The problem was the camshaft position sensor. I loosened up the distributer and re-timed it and tightened it all up. Then my CEL went

...position sensor on a 1999 Chevy Suburban 1500? That should be right behind the harmonic balancer in frt of the engine the crank sensor should bolt into the timing chain cover.remove bolt and with a ...

camshaft position sensor on a 2000 Chevy Suburban Chevrolet fools you with this one. The thing that was the distributor in the back of the engine, is really the cam position sensor. It has a cap,rotor

camshaft position sensor the cam position/angle sensor should be inside distributor. remove distributor cap should be on drivers side of housing you will probably need to remove rotor for acess to two

where is the cam-position sensor located on a 1999 chevy blazer The camshaft position sensor is a part of the distributor

...1999 gmc suburban, surging during idle and drive have replaced wires, plugs, MAS,heat sensors, camshaft positioning, coil, fuel filter,distributer cap and button and I still have rough idle and ...

...position on the front of the truck and pull up with the three bolts that hold it to the camshaft. After the gears are in place, turn the engine two full revolutions to make certain that the timing ...

2009 chevy suburban 1500 ltz 5.3l Camshaft Position Actuator location? The camshaft sensor is located on the top of the block directly behind the intake manifold.