Questions & Answers for: Mitsubishi camber

...on a alignment machine to set correctly, just eye balling it is not an option. It need not be the camber (tyre lean) at fault, the rear end may have developed excess toe-in. The adjustment for that ...

how do you adjust the camber & caster on a 1997 diamante? You take it to an alignment shop. Put the monkey on them. They have the equipment to get it back to specs. Good Luck, Ned an alignment ...

...? the only way to properly align it is with the removal of the bolt correct as it rely on caster camber settings so maby a more well known repair shop is in ...

how to install eclipse camber kit I WANT TO INSTALL A CAMBER KIT ON MY MITZIBISHI ECLIPSE HOW DO I PUT IT ON

how do you adjust the rear camber on a Mitsubishi how do you adjust the rear right camber on a Mitsubishi lancer 2003 mine is -1.7 have you lowered the car? There are bolts that you can get which ...

...drive my rear 2003 Mitsubishi outlander all wheel drive my rear tires have (really bad) negative camber, getting mixed answers from Mitsu, some tell me that camber is not adjustable, other tech ...

Loud squeaking/ squealing noise when turning wheel My GTO is making a loud embarrassing squeaking noise when I turn the wheel. I have replaced the shocks,cambers, lower ball joints, rack boot, tie rod

to left or right by self it's hard to drive and wearing the tyres. castor angle 1/2 to 11/2 degrees camber 0 to 1degrees toe in 1/8 to 1/4 As it has to be done at a wheel alignment shop they will know

How can I adjust my rear wheel camber to be aligned just right on a 2001 Mitsubishi eclipse gt? You have to take it to a garage for 4 wheel alignment. It has to be connected up to high tech equipment.

How to tell if you got a bad spark plug wire 94 mitsubishi montero Won't fit all the way down in camber to connect with spark plug Hi Eric If your unable to get the lead onto the spark plug then there