Questions & Answers for: Pontiac G6 cam sensor

...cam shaft position sensor. The factory had routed the wiring harness in between the intake and power steering pump. Over time it rubbed through the sheathing and exposed the bare wire which was ...

...cam sensor is advanced.I have replaced both sensors and it is still the same code.The transmission shifts super hard,and the problem is intermittant.Any help for this mess.Thank you. what engine? If ...

...cam sensor * Damaged wiring to crank/cam sensor * Timing belt/chain tensioner damaged Possible Solutions: 1. First, visually inspect the cam and crank sensors and their harnesses for damage. If you ...

where is intake camshaft position sensor The intake cam sensor is located on the transmission end of the head, intake manifold side. Hope this helps.

...cam shaft sensor located on my g6? THE 2.4L ENGINE CMP SENSOR LOCATED REAR OF THE ENGINE CYLINDER HEAD. FOR THE 3.5L ENGINE CMP SENSOR LOCATED BEHIND TOP OF TIMING COVER IN FRONT OF THE INTAKE ...

...in a 2007 pontiac G6 4 cylinder Hello,Thanks for using fixya.this vehicle uses an intake and exhaust cam sensor they are both on the back of the head on each side I hope this answers your ...

...cam position sensor on 2006 Pontiac g6 It's sensor closest to fire wall Your camshaft sensor is under the engine's cover. It is likely a black plastic piece connected to a large metal ...

...cam position sensor I see Oil in the cam position sensor port Took the vehicle to auto zone and coded engine light, threw code P0011....cam position sensor. replaced cam position sensor, noticed some ...

what does a code P0014 mean? 2.4 Code 14 is for a problem with the exhaust cam position timing. The problem could be the sensor or the cam may be out of time with the intake cam.

...SENSER FALT HOW CAN I TEST OR IS THERE ANOTHER SENSER CONNECTED TO CAM SHAFT SENSOR Buy the sensor from the car dealership. The sensors at auto stores are inferior and sometimes do not work