Questions & Answers for: Plymouth Breeze cam sensor

Question about 1999 Breeze

2 Answers

find someone with a diagnostic computer. and have it tested . my 99 plymouth breeze is doing the same thing.i found out it was a cam sensor. now i just need to find out where the cam sensor is located

Ad

Question about 1997 Breeze

1 Answer

...cam or sensor Could you explain how it could be a bad cam or cam sensor? Check this out.. The cam sensor wires and the Ignition coil wires CAN interchange.. If you reverse them.. It'll blow the ecm.. ...

Ad

Question about 1998 Breeze

1 Answer

volts going in and good grounds. Ant ideas? You likely already checked this but how about a broken timing belt. If the cams aren't turning the cam sensor isn't working and the pcm won't fire the plugs

Question about 1998 Breeze

1 Answer

...i think its the cam sensor but do not want to just start replacing parts without good indication of what it might be more likely is the crank sensor, vehicle will still run with a bad cam ...

...cam sensor what else could it be have you checked timing belt?it may be broken..engine controller must see signals from both cam and crank sensors to close shutdown relay to send power to coil..if ...

Question about 1997 Breeze

2 Answers

...cam sensor, crank sensor, coil pack, mas sensor..etc...it ended up being a burnt spot on the wire harness. They said this is a common problem for the stratus/breeze/cirrus/intrepid.....the most it ...

...would that cause it to not get spark and give that code? Did you check the coil or coil pack? Also, I'm pretty sure that the crankshaft position sensor regulates the spark and not the cam

Question about 1998 Breeze

1 Answer

...cam sensor what do i do You can try to replace it your self or have it done by a mechanic. If you would like to further diagnose or locate the part, please let me know. I would need your vehicle info ...

...cam shaft sensor still not starting its cranking but not igniting any suggestions?? For starters, it would be nice to know which engine we are talking about.The 2.0L (VIN code [C]) or the (2.4L VIN ...

Question about 1998 Breeze

2 Answers

...& P0340 P0340 Camshaft Position Sensor Circuit Malfunction I had these codes come on, and after replacing both cam and crank sensors, turns out one of the wires to the crank sensor was

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...