Questions & Answers for: Honda CR-V cam sensor

...cam sensor. It does not necessarily mean the sensor is bad. It can be one of these things. 1. Cam sensor wiring routed too close to spark plug wiring (causing interference) 2. Poor wiring connection ...

CAM SHAFT POSITION SENSOR B DO I NEED TO RESET THE SENSOR OR THE ECM/PCM PLEASE EXPLAIN ME WELL WHAT TO DO AFTER REPLACING THI PART AND THE SETING THANK YOU. How long did it idle after the first start

...store. If its still good, try replacing the crank or cam position sensor. If you still get no spark, then you will need to follow up with the tech manuals for thorough trouble shooting

cam shaft pos sencer code. replaced both sencers. still same code. wiring & plugs look good. car wont idle & stalls Now you know that codes ,do not tell you what is wrong and what to replace ...

...cam chain away from magnetic fields. Crankshaft set at TDC marks Turn the crankshaft pulley so its Top Dead Center (TDC) mark (1) lines up with the pointer (2). Raise and support the vehicle. Remove ...

cam sensor. Car is now not starting at all. Wants to turn over but doesn't it floods out. Is this a timing chain issue or cam sensor issue that is causing the car not to start? A faulty cam sensor can

cam position censor The camshaft position sensor is under the cambelt cover, I think you need to replace the belt to get to the sensor. If you have replaced the sensor and the light comes back on, you

...on a 2005 honda crv Location on camshaft sensor on end of the cam. no engine stated of the many options, so ......????? nor why you ask. DTCs? what? login to alldata.com and read. its all

...are hard to find but if you keep checking you will find it. If available to you scope crank sensor and cam sensors when cold then when hot to see if the pattern changes. Keep posting results

the location of the camshaft censor on a HONDA C.R.V 1999 There is no dedicated cam sensor on these devices. The cam position is sensed by the electronics in the distributor.