Questions & Answers for: Dodge Neon cam sensor

cam sensor 1995 neon, code 22, I replaced the cam sensor and it still shows up. Just did a head job and when I put it back together I might have cracked the magnet in the single OH cam where can I get

...the cam and crank sensors, what can be causing this? V/R wilbecraft Shake or gentle tug on the wiring harness and try starting the engine! I found that my problem was with the cam sensor wiring ...

Cam sensor causing other probelems I have a 2005 dodge neon. Its over 100,000 miles now. The engine light has been coming on. Some days it drives fine.. Other days it jerks/sputters when i try to go ...

...cam sensor problem? my check engine light came on and my car started puttering when i gave it gas. My body had a diagnostic tool and we figured out that it was ether the cam shaft sensor or the crank ...

...cam sensor on my 2000 neon, check enfine light still comes on, my code reader still states it the cam sensor, could it be the wires into the sensor? If you are getting a cam sensor code, it is not ...

...cam sensor, or the crankshaft sensor? Or is there another possibility? P1390 means cam/crank not in time. Probably slipped a tooth on the cam belt (Installed wrong most likely, easy to do) or, just a ...

...sensor 0344 cam position sensor intermittent 0340 cam position sensor failure I would replace the cam position sensor from the codes you provided. The knock sensor would most likely be related to the ...

...cam sensor, bought a new part and bolted it up, i still have the code 0344, misfire detected... also new plugs and wires. any alignment required for sensor? i removed the old one and bolted new one.. ...

...cam shaft sensor is unplugged i have check the timing over and over, replaced the cam sensor and crank sensor, replace the wiring harness and check the cam shaft magnet! And i have checked the cam ...

...cam sensor connected. what's wrong with this picture? i unplug the camshaft sensor, crank the car and it started so i check for codes, came out with p0340, so i plugged it back now i gets no codes, ...