Questions & Answers for: Audi A4 cam sensor

...sensor the camshafts are not correctly timed. 90s Audis are not very common in my country but from what I can gather: The mark for the crankshaft gear is on the cover you have to remove in order to ...

...would have any thing to do with that.   any other suggestions would be great. you have the cam and crank sensors to check. also driving like this can ruin the cat so that should be checked

Cam position sensor error. 2003 A4 2.0 FSI top end engine rebuild after timing belt broke. Engine now back together but reports 16725 cam position sensor error code. Timing is perfectly aligned & ...

...cam crank sensor on 2004 Audi A4 The "cam crank" sensor is the "reader" for position and speed of the camshaft. This sensor send informations to Engine Control Unit about camshaft position and speed. ...

...cam position sensor - jb weld definately would not work for very long in that heat. REplace with new - you should be all set. The computer uses the cam's position to time the spark and fuel

cam shaft sensor on my 98 a4 2.8 quattro the car was running great before the replacement. After replacement when car heats up, poor idle and 1,2,3 bank a multiple misfire code appears? any solutions?

...fix this? You would need to find a test for the cam sensors, could also be the rpm sensor. P1392 Camshaft Pos.Sensor,Bank2 Open Circ./Short to B+ P1338 Camshaft Pos.Sensor,Bank1 Open Circ./Short to

Camshaft position sensor bank 1 How to change camshaft position sensor bank 1 of a audi a4 2002 v6 3.0 Bank one is passenger side cylinder bank. Cam sensor should be at front of cylinder head.

engine cranks but wont start run fault codes and look for cam/crank positions sensors faults . check immobiliser is working correctly. Check that the cam is turning (broken cam belt)

cam or crank sensor failing and they are not syncing. Third, you could have a pcm/ecm failure or issue. Did you get a reference code? It could be a faulty Camshaft Position Sensor. It could be sending