...a 4 cylinder you have 1 cam sensor and 1 crank sensor. Both parts are the same. If you have a 6 cylinder, then you have 2 cam sensors and 1 crank sensor. These sensors are all different. Thanks
Question about 2005 Altima
...sensor, cam sensor & air to fuel sensor all 02 sensor, cam sensor & air to fuel sensor all have crapped out....what makes this happen? The 02 sensor & cam sensor have been changed twice ...
...cam sensor, but I can't find one. It's a 2005 nissan altima. Do they have a cam sensor and a crank sensor? This engine has both. Nissan recommends replacing them at the same time, I think your local ...
sensor. instead i replaced the crank shaft position sensor. the car is still shutting off anytime it feels like. what could it be. i believe that car comes with a dist,it has a cam sensor built end it
...cam and crank angle sensor in 96 N15 I need to find the Cam and Cranks angle sensor on my 1996 Nissan Pulsar N15 1.5L The cam and crank position sensor can be found in the front of the crank on the ...
Question about 1996 Altima
...sensor and cam cause it to shut down while idling? The answer to your question is "YES" and "NO". What I mean by this is a couple different things. Yes, the cam and/or crank sensor can ...
...cam sensor on bank two is not sending the correct signal to the engine computer. So no spark. If you have replaced the sensor, the problem could be the cam or the wiring from the sensor to the ...
...cam sensor in a 2002 nissan quest? HI Chuck! The cam position sensor is inside the distributor on the quest. If the cam sensor has gone bad you need to replace the distributor assembly as it is not ...
Question about 2005 Almera 1.5
...cam sensor bank one. Replaced cam sensor. Still doing same thing. There are a couple of other sensors that could be bad that can contribute to this code. If you replaced the cam sensor, that's good. ...
Question about 2005 Almera 1.5
cam sensor CMP is big time error , means fix me. but is not bad it is cam slip making CMP lie. the cam belt is bad and screams,. if this is belted cam engine DO NOT DRIVE It , but do fix that. if DOHC
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,309 Questions
1,122 Questions
1,306 Questions